Tag Archives: photomatix

Project 52 – #10 – Brisbane Riverwalk


Brisbane Riverwalk
Originally uploaded by jezza323

This is looking down part of the Brisbane Riverwalk. I took this shot from next to the Riverside Centre building, the main building in the shot is the Riparian Plaza and the building at the left is Waterfront Place.

Taken using Pentax K200D, Pentax SMC DA 18-55 AL II and Slik 500 DX Pro Tripod. This is a HDR Panorama, composed of 5 HDR images (I overlapped them a lot), each composed of 3 images shot at +2, 0, -2. Blended and Tone Mapped with Photomatix batch processor using Details Enhancer, and stitched using Autopano.

Project 52 – #9 – Old Customs House


Old Customs House
Originally uploaded by jezza323

This is a shot of the Old Customs House in Brisbane. This is the view from the Brisbane Riverwalk.

This shot is another HDR Panorama, this time blended at stitched from 12 photos. It is stitched from 4 HDR images in a 2×2 layout using Autopano Giga, and each HDR image was shot at +/- 2.0 EV and then blended using Photomatix with the Batch Processing function, using Details Enhancer for Tone Mapping.

Shooting and Processing

  • Shot all 12 photos in Pentax RAW (PEF), 4 lots of +/- 2.0 EV brackets
  • Imported all images from memory card using Lightroom 2.5
  • Exported all 12 photos to a new subfolder as 16bit TIFF files
  • Opened Photomatix and ran Batch Process over the new subfolder
  • Opened Autopano and selected the 4 resulting TIFF HDR images to stitch
  • Rendered the created panorama to another 16-bit TIFF
  • Imported final TIFF into Lightroom 2.5
  • Edited white balance (its a hard one because the Riverwalk is lit with different colour lights to the lights on Customs House and cropped image
  • Exported to JPG for Web

Antarctic Beech Trees

Here is another HDR Panorama I took at Springbrook National Park on the weekend. These are Antarctic Beech Trees, which are quite rare, as you will notice if you read the wikipedia article. This shot was taken with the K200D, Pentax SMC DA 18-55 AL II kit lens, and Slik 500DX Pro tripod. It was raining lightly when I took the shot. I setup the tripod just on the inside of the fence which protects the trees from the path.

It was because I was so close that this had to be a panorama. I was not able to fit the base of the trees in the shot. I was also forced to use HDR for this shot due to the extremely bright white clouds behind the tree trunks. I did not want to lose the detail in the roots.

The shoot and processing details are as follows

  • Shot in Pentax RAW (PEF)
  • Imported into Lightroom 2.5
  • Exported to 16 bit TIFF
  • Exposures blended using Photomatix Batch Processing with Details Enhancer Tone Mapping
  • Photomatix resulting images were then stitched using Autopano
  • Resulting panorama was imported back into Lightroom 2.5
  • Minor adjustments made in Lightroom
  • Exported to JPG for Web

A Rainy Weekend of Camping


Peaceful Outlook
Originally uploaded by jezza323

I haven’t posted for a few days as I was off exploring the world. A friend and I travelled to Springbrook National Park for a weekend of camping and photography, only to discover that the weather was against us. It rained very heavily most of the time, so not much photography happened!

Here are the first of the processed shots though.

This shot was taken using the Pentax DA 18-55 AL II lens @ 18mm. It is 3 HDR images stitched together (HDR’s were 3 images each @ +/- 2.0 EV). All shots were taken in Pentax RAW (PEF), imported to Lightroom 2.5, blended using Photomatix batch process with Details Enhancer (quite extreme one too!) and stitched using Autopano.

I also took another HDR panorama from the other side of the shed looking back to the bridge I took this shot from. This is the link to flickr

Project 52 – #2 – Kurilpa Bridge


Kurilpa Pedestrian Bridge, originally uploaded by jezza323.

Buy art

This is the 2nd shot for my 2010 Project 52 – “Brisbane Landmarks”

This is the recently completed Kurilpa Bridge, a Pedestrian Bridge from the Brisbane CBD over the Brisbane River to West End/Southbank.

This is a 3 shot HDR, taken with my Pentax K200D and Pentax SMC DA 18-55mm AL II

Base shot was 18mm, ISO 100, f9.0, 5 sec, bracketing was at +/- 2.0 EV

UPDATE – Processing details now posted – sorry for the delay.

Shot and Processed as follows:-

  • Shot in Pentax RAW (PEF)
  • Imported into Lightroom 2.5
  • Exported to 16-bit TIFF
  • HDR Generated using Photomatix
  • Tone Mapped using Details Enhancer (settings shown below)
  • Save-as 16-bit TIFF
  • Import into Lightroom 2.5
  • Minor editing applied using adjustment brush to remove some unwanted detail on the right of image (brush positioning and settings shown below)
  • Increased Blacks and Brightness
  • Exported to JPG for Web

 

 

Project 52 – #1 – It Begins


Southbank Peace Pagoda

Originally uploaded by jezza323

Here is the first shot for my 2010 Project 52 which I have decided to use the theme of “Brisbane Landmarks”. It is a Nepalese Peace Pagoda located at Southbank in Brisbane, QLD Australia. It was built for Expo ’88 and petitioned successfully to remain on the old Expo site (which is now Southbank).

This photo is a HDR, combined from 11 shots. All shots were taken at f16.0 and ISO 100, and shutter speeds were – 1/30, 1/15, 1/8, 1/4, 1/2, 1, 2, 4, 8, 15, 30 secs.

Processing as follows :-

  • Shot in Pentax RAW (PEF)
  • Imported into Lightroom 2.5
  • Shots exported to 16-bit TIFF
  • Photomatix generated HDR from 11 16-bit TIFFs
  • Photmatix Tone Mapped using Tone Compressor
  • Saved as 16-bit TIFF
  • Imported new file back to Lightroom 2.5
  • Cropped in Lightroom 2
  • Edited in Lightroom  as shown below (settings not shown were not edited)